5 step adjustable suspension in bike? How to soften , adjusted it?

By Deepak -

Adjustment of 5 stepped suspension
5 stepped suspension 


It is a modern suspension system which provides the notches to adjust the height of the suspension system. Generally stepped suspension is fitted with rear suspension by almost all motorcycle manufacturers. The stepped suspension system can be adjusted for your comfort for various load . If your bike carries single or lighter passenger ei you the stepped suspension may be adjusted to its lowest groove. This will lower the height and spring tension of suspension and give a comfort ride.
If rider's weight is heavier or with pillon rider adjust the stepped suspension to its lowest groove. It increases the height of suspension and spring tension of suspension.

How to adjust the 5 or 7 stepped suspension of your bike?


The stepped suspension has following parts
  • Stepped tube with groove
  • Socket with notches

Required tools
  • Monkey pliers or blunt screwdriver and light hammer

Rotate socket with help of monkey pliers or tapping with tapper and light hammer and adjust as your comfort and weight of passenger.
if you are single Rider then keep it the minimum.
If your bike carrying always double passengers you have to adjust the height of the suspension system to its maximum.

Comments

Post a Comment

Popular posts from this blog

I3s technology in hero splendor, APDV ignition system and bank angle sensor

By -
Image
Hero engine  I3s technology(Idle Start-Stop System) I3s is a technology developed by Hero Motocorp which puts the engine in sleep mode when it isn't required. It stops the engine While standing on traffic, talking on mobile phone on side of road or any other reason. If your bike is running ideally more than specified time that is sensed by sensor and sends signals to ECU. ECU stepped engine as you press clutch liver your engine starts. It happens in very short time, thanks to science and technology that minimizes pollutions and gives fuel efficient ride for us. i3s basically stands for Idle Start-Stop System which turns the engine off automatically when not required and then switches the engine on when you simply press the clutch. APDV ignition system  The technology is used by Hero motor corps in his motorcycle Splendor Pro, Passion Pro and the Splendor NXG. term APDV stands for "Advanced Pro Series Digital Variable Ignition System". The ...
Read more

ANTI-LOCK BRAKE SYSTEM, ABS, ANTI-SKID BRAKE SYSTEM, BANK ANGLE SENSOR

By Deepak -
Image
ABS Its Operation and defects  Anti-Lock brake  Anti-Locking of brakes is a safety measure that save the bike and riders from skidding while braking. Braking is very prune to skid at corner or slippery roads and its become fatal at high speed. Generally moving wheels skid when it is locked by braking forces. ABS prevents the wheel to lock thereby maintaining tractive contact with the road surface. यदि आप इसे हिन्दी में पढ़ना चाहते हैं तो यहाँ क्लिक करे  The techniques which is  practiced by skillful drivers. They save them selves and others life with their skills without ABS vehicles widespread. However ABS operates at much faster rate and more effectively than most drivers can manage. Although ABS offers improved vehicle control and decreases stopping distances on dry and some slippery surfaces. ABS is used on aircraft and on land  vehicles, such as cars, motorcycles, trucks, and buses. ABS is  used in all hydraulically, air and mechanica...
Read more